Dynamic Z

Dynamic Z is a patch for Super Mario World that allows performing a variety of actions during V-Blank. It was made by anonimzwx. Dynamic Z is meant to be a replacement for DSX as both allow coding dynamic sprites.

Features

Dynamic Sprite Support: Sprites that uploads their graphics to the VRAM when they need allowing unlimited number of frames.
Shared Dynamic Sprite Support: Dynamic Sprites but each copy of the sprite shares graphics then doesn't have limitation of number.
Semi Dynamic Sprite Support: Regular Sprites that uploads all their graphics to the VRAM when they are spawned on the level, each copy of the sprite use the same space in VRAM.
Giant Dynamic Sprite Support: Very Big Dynamic Sprites. Any that fits in 48 16x16 tiles or less.
Graphics Change on the fly: Can change GFXs in game by code.
Tilemap Change on the fly: Can change Tilemaps of any layer in game by code.
Color Palette Change on the fly: Can change color palettes in game by code.
Block Changer: Allows to change several blocks, this allows to modify terrain of Layer 1 or Layer 2.
DMA Mirror: Includes a Ram Address that mirrors register $420B and can be used to do DMA transfers.
SA1's Widescreen: Makes easier to use the widescreen of SA1 pack, every 6~7 scanlines killed Dynamic Z allows 8 16x16 tiles more to use in Dynamic sprites or Graphics Change. Only Available if ROM uses SA1.

Optional Features

Player Features: Can change graphics or color palettes of player on the fly, allowing Custom Players, the size is defined by the user but bigger player = less dynamic sprites. Also in vanilla case optimize player routine to save a lot of cycles during NMI. Not Compatible with resources that change things of the player like 8x8 tiles DMAer or 32x32 player (New version will be compatible with LX5's Custom Power Ups).
50% More Mode: if it is activate, status bar, podoboos and most of minor DMA, then is possible to send 50% more data by DMA, that means 50% more Dynamic Sprites or graphics changes. Not compatible with resources that changes things with Status Bar.

Dynamic Z vs DSX

	DSX	Dynamic Z
Number of Dynamic Sprites	4 of 32x32, 1 of 64x64	Any number of sprites while it fits on the designed space. By default allows 32 16x16 tiles.
Frame Rate	60 FPS	30 or 60 FPS, if you use 30 FPS sprites you can use more dynamic sprites.
Performance	Requires a buffer to sort the data before transfer it to VRAM wasting a lot of cycles.	Send data directly to VRAM and only transfer data when is needed saving a lot of cycles on NMI, It doesn't require a buffer then doesn't waste cycles fitting graphics on the buffer.
Sizes	32x32 or 64x64, do others sizes is possible but harder.	Any if it fits on the designed space.
VRAM Options	Only allows to fit Dynamic Sprites on SP4 Second Half	User can define where fit Dynamic Sprites, Default address can be changed on the patch, address can be changed in game by code.
Shared Dynamic Sprites	No	Allows Dynamic Sprites that shares graphics on VRAM, Shared Dynamic Sprites doesn't have limitations of number.
Semi-Dynamic Sprites	No	Normal sprites that when are spawned on the stage, they upload all their graphics to VRAM.
Giant-Dynamic Sprites	No	Very Big Dynamic Sprite, (Max Size any that use a space in vram of 48 tiles).
Auto-Defragmentation of VRAM	No	When a Dynamic sprite is spawned, it clears reserved space of unused slots and compress space on VRAM.

Instalation

Without SA-1

Insert Dynamic Z as any other patch.

With SA-1

Open a Clear ROM with Lunar Magic.
Expand Rom (if you want to use a lot of Dynamic Sprites i recommend 4mb)

Open "sa1.asm" and change this to 0:

!DSX		= 1				; Put 0 if you want to turn off legacy (Dynamic Sprites) patch support.
						; (as anoni's Dynamic Z should obsolete it soon.)

Insert SA-1.
Insert Dynamic Z as any other Patch.

Installing Dynamic Z's Library and Defines

Pixi

Run "Dynamic Z Pixi Installer.exe". This will generate a define file in "./asm/ExtraDefines", that can be used by any other Dynamic Sprite. If you want to do it manually, just copy the file "DynamicZDefines.asm" and put it on "./asm/ExtraDefines".

Uber asm patch

Under Construction

Uber asm Tool

Under Construction

GPS

Under Construction

Overworld Sprite Tool

Under Construction

Inserting Graphics and Tilemaps

Dynamic Z includes a tool to insert graphics or tilemaps on the ROM using freedata and allows to resources get them with just a macro. This system is specially useful for resources that uses more than 1 BNK, I recommend use it always for any resource because freecode is better keep them just for code and freedata for graphics and tilemaps.

Put graphics or tilemaps on DynamicExGFX folder.

Open "resourcelist.txt". It will look like this:

PIXI:
.Normal
.Cluster
.Extended
OTHER:

For Normal, Clusters or Extended Sprites, write the name of the sprite on the correct label.

Example:

PIXI:
.Normal
klaptrap
klump
piranha plant
.Cluster
DKC butterfly
DKC fish
.Extended
OTHER:

For other resources write the complete path after label OTHER.

Example:

PIXI:
.Normal
klaptrap
klump
piranha plant
.Cluster
DKC butterfly
DKC fish
.Extended
OTHER:
./blocks/block that change GFX when is touched.asm
./level/awesome uberasm.asm

Run "GFX and Tilemap Inserter.exe".
Insert resources.

Using Normal Dynamic Sprites with the New System

if the sprite is 60FPS, it must be inserted on lunar magic as any other sprite. if the sprite is 30FPS, The highest 2 bits of Extra Byte 1 requires on of this 3 values.

00: Automatically assign if It uploads graphics to vram on even or odd frames.
01: It uploads graphics to VRAM only in odd frames.
02: It uploads graphics to VRAM only in even frames.

By default use always 00 for this, 01 and 02 are used if you want to do GFX or Tilemap Changes and use Dynamic Sprites without flickering, for that you can do that dynamic sprites use only odd frames and upload GFX or Tilemaps in Even Frames.

Library

Dynamic Z includes severals routines and macros to help developers. Some of them can be used on any resource and others are exclusive for Dynamic Sprites.

Global Library

Variables

Name	Size	Default Address Lorom	Default Address SA-1	Description
DZ.Timer	1	7F0B44	418000	Increase in 1 every frame that Dynamic Z is executed. Used to syncronize 30FPS Dynamic Sprites.
DZ.MaxDataPerFrameIn16x16Tiles	1	7F0B45	418001	How many Tiles of 16x16 can be send to VRAM per frame without flickering.
DZ.MaxDataPerFrame	2	7F0B46	418002	How many bytes can be send to VRAM per frame without flickering. Is Calculated as DZ.MaxDataPerFrameIn16x16Tiles*0x80.
DZ.PPUMirrors.CGRAMTransferLength	1	Example	Example	Number of transfers to CGRAM, Max Value is 0x40.
DZ.PPUMirrors.CGRAMTransferSourceBNKLength	128	Example	Example	First byte is the BNK of Source, Second byte is the amount of data send by each transfer to CGRAM.
DZ.PPUMirrors.CGRAMTransferOffset	64	Example	Example	Address of CGRAM to start to send data.
DZ.PPUMirrors.CGRAMTransferSource	128	Example	Example	Address of table with Colors.
DZ.PPUMirrors.VRAMTransferLength	1	Example	Example	Number of transfer to VRAM, Max Value is 0xFE.
DZ.PPUMirrors.VRAMTransferSource	190	Example	Example	Address of resource send to VRAM.
DZ.PPUMirrors.VRAMTransferSourceBNK	190	Example	Example	BNK of Address of resource send to VRAM.
DZ.PPUMirrors.VRAMTransferSourceLength	190	Example	Example	Data send by each transfer to VRAM.
DZ.PPUMirrors.VRAMTransferOffset	190	Example	Example	Address of VRAM to starte to send data.

Routines

UNDER CONSTRUCTION

Macros

UNDER CONSTRUCTION

Dynamic Sprites Library

Variables

Name	Size	Default Address Lorom	Default Address SA-1	Description
DZ.DSLastSlot	1	7F0B47	418004	Example
DZ.DSFirstSlot	1	7F0B48	418005	Example
DZ.DSMaxSpace	1	7F0B49	418006	Example
DZ.DSFindSpaceMethod	1	7F0B4A	418007	Example
DZ.DSStartingVRAMOffset	2	7F0B4B	418008	Example
DZ.DSStartingVRAMOffset8x8Tiles	1	7F0B4D	41800A	Example
DZ.DSTotalSpaceUsed	1	7F0B4E	41800B	Example
DZ.DSTotalSpaceUsedOdd	1	7F0B4F	41800C	Example
DZ.DSTotalSpaceUsedEven	1	7F0B50	41800D	Example
DZ.DSTotalDataSentOdd	1	7F0B51	41800E	Example
DZ.DSTotalDataSentEven	1	7F0B52	41800F	Example
DZ.DSCurrentSlotSearcher	1	7F0B53	418010	Example
DZ.DSSlotSearchedOffset	1	7F0B54	418011	Example
DZ.DSLocUsedBy	48	7F0B55	418012	Example
DZ.DSLocSpriteNumber	48	7F0B85	418042	Example
DZ.DSLocSharedUpdated	48	7F0BB5	418072	Example
DZ.DSLocSpaceUsedOffset	48	7F0BE5	4180A2	Example
DZ.DSLocSpaceUsed	48	7F0C15	4180D2	Example
DZ.DSLocIsValid	48	7F0C45	418102	Example
DZ.DSLocFrameRateMethod	48	7F0C75	418132	Example
DZ.DSLocFindSpaceOrder	48	7F0CA5	418162	Example
DZ.DSLocUSNormal	22	7F0CD5	418192	Example
DZ.DSLocUSCluster	20	7F0CEB	4181A8	Example
DZ.DSLocUSExtended	10	7F0CFF	4181BC	Example
DZ.DSLocUSOW	16	7F0D0F	4181CC	Example

Routines

!ClearSlot	Clear slots of Dynamic Sprites that are not used and start VRAM Defragmentation to use less space. It is recommended to use when a Dynamic Sprite dies.

Macros

Macro	Description	Parameters	Return
FindSpace	Check if the VRAM space assigned to the sprite is valid or not, also if is required moves the sprite to other VRAM space to defragment their graphics.	DSSlotUsed : Must be a DZ.DSLocUS<Sprite Type>,x for example if you use a normal sprite use %FindSpace("DZ.DSLocUSNormal,x").	Carry Set if VRAM space assigned to the sprite is valid.
CheckSlot	Use !ClearSlot and then find a valid slot and assign it to the sprite, also assign its VRAM space.	FrameRateMode : 00 Automatically assign if Sprite uploads graphics in odd or even frames, 01 Sprite uploads graphics in odd frames, 02 Sprite uploads graphics in even frames and 03 Sprite can upload graphics in any frame. NumberOf16x16Tiles : Number of tiles of 16x16 that the sprite needs to reserve in VRAM. SpriteNumber : For Cluster Sprites use !ClusterSpriteNumber, for Extended Sprites use !ExtendedSpriteNumber and for Overworld Sprites use !OWSpriteNumber. SpriteTypeAndSlot : it have format stt 00000, s => 0 Dynamic Sprite and 1 Shared Dynamic Sprite, tt => 00 Normal Sprite, 01 Cluster Sprite, 10 Extended Sprite and 11 Overworld Sprite. SpriteUsedSlot : Must be a DZ.DSLocUS<Sprite Type>,x for example if you use a cluster sprite use "DZ.DSLocUSCluster".	Sprite is deleted if don't find a valid slot.
CheckSlotNormalSprite	Check Slot but for Normal Sprites, it assumes that ExtraByte is used for FrameRateMode.	NumberOf16x16Tiles : Number of tiles of 16x16 that the sprite needs to reserve in VRAM. SpriteTypeAndSlot : it have format s 0000000, s => 0 Dynamic Sprite and 1 Shared Dynamic Sprite.	Sprite is deleted if don't find a valid slot. The sprite can be respawned later.
GFXTabDef	Generates the define !GraphicsTable, used to find GFX inserted with GFX and Tilemap Inserter.	index : Index of resource in GFX and Tilemap Inserter, it is autogenerated by the tool using the define !ResourceIndex.	None
GFXDef	Generates a define !GFX<offset> (for example !GFX00) that haves the address of the gfx.	offset : Is an Hex number of 2 digits, the number represents the index of the GFX, for example if it is the first GFX of the sprite, then is 00, the second is 01, etc.	None
DynamicRoutine	Fill tables of VRAM DMA Mirrors to uploads graphics.	VRAMOffset : Index of the first tile of 8x8 where the routine should start to fill space, This can be get with macro GetVramDispDynamicRoutine. ResourceAddr : RAM Address of the GFX that you want to use. If you use GFX and Tilemap Inserter, you can use #!GFXAA, where AA is the number of the GFX you want, for example #!GFX00 is the first GFX file used by the sprite. ResourceAddr : BNK of the RAM Address of the GFX that you want to use. If you use GFX and Tilemap Inserter, you can use #!GFXAA>>16, where AA is the number of the GFX you want, for example #!GFX00>>16 is the BNK of the first GFX file used by the sprite. ResourceOffset : Starting position where the DMA must start to read on the GFX. Size : Number of tiles of 8x8 that must send to VRAM.	None
CheckEvenOrOdd	Is used to syncronize Dynamic routine with Animation routine in 30 FPS Dynamic sprites.	DSLocUS : Must be a DZ.DSLocUS<Sprite Type> for example if you use a normal sprite use CheckEvenOrOdd(DZ.DSLocUSNormal).	Z flag is 0 if lowest bit of DZ.Timer is equal to FrameRateMode. 1 if lowest bit of DZ.Timer is different to FrameRateMode
GetVramDisp	Get the tile offset, this is used on the Graphic routine to Remap OAM Tiles to the space used by the Dynamic Sprite	DSLocUS : Must be a DZ.DSLocUS<Sprite Type> for example if you use a normal sprite use CheckEvenOrOdd(DZ.DSLocUSNormal).	A = Offset
GetVramDispDynamicRoutine	Similar to GetVramDisp but for Dynamic Routine	DSLocUS : Must be a DZ.DSLocUS<Sprite Type> for example if you use a normal sprite use CheckEvenOrOdd(DZ.DSLocUSNormal).	A = Offset
RemapOamTile	Remap OAM Tile to the space used by the Dynamic Sprite on the Graphic Routine	Tile : The tile that to Remap Offset : Ressult get from GetVramDisp macro.	A = Remapped OAM Tile.