Difference between revisions of "LC LZ2"

From SnesLab
Jump to: navigation, search
m (Long commands dont add +1 to the length)
m (Undo change about Long header ot using L+1, seems to have been an inaccuracy from smwiki)
Line 40: Line 40:
       CCC:        Real command
       CCC:        Real command
       LLLLLLLLLL: Length
       LLLLLLLLLL: Length
      Of note: In long commands, anything that says (L+1) earlier is just L, you don't add 1.

Revision as of 15:06, 7 October 2021

LZ2 or LC_LZ2, as named by Lunar Compress, is a lossless data compression format, used by Super Mario World to compress graphics. It is also used by A Link to the Past and Super Mario World 2: Yoshi's Island.


The compressed data consists of "chunks", each with a header:


CCC:   Command bits
LLLLL: Length

If the header byte is $FF, the end of the compressed data has been reached, and decompression will be aborted.

Here is a list of commands bits which the LC_LZ2 decompression function can use during the decompression:

000    "Direct Copy"
       Followed by (L+1) bytes of data
001    "Byte Fill"
       Followed by one byte to be repeated (L+1) times
010    "Word Fill"
       Followed by two bytes. Output first byte, then second, then first,
       then second, etc. until (L+1) bytes has been outputted
011    "Increasing Fill"
       Followed by one byte to be repeated (L+1) times, but the byte is
       increased by 1 after each write
100    "Repeat"
       Followed by two bytes (ABCD byte order) containing address (in the
       output buffer) to copy (L+1) bytes from
101    (Unused command)
110    (Unused command)
111    "Long length"
       This command has got a two-byte header:
       CCC:        Real command
       LLLLLLLLLL: Length


During the decompression, the decompressed chunks are outputted into a buffer which is either RAM or SRAM. SMW uses the RAM address $7E:AD00 as its decompression buffer.


You can use the LC_LZ2 compression to mainly compress graphics. Technically you can compress anything with this format, but graphics is preferred due to their big size. Seeing the SNES isn't fast, the decompression takes a while to finish, so whenever you overuse the compression the loading time will increase.


You can see an LC_LZ2 decompression routine setup at SNES $00:B888. The decompression routine itself is located at SNES $00:B8DE.

External links

Lunar Compress, a library by FuSoYa made to handle loading various game graphics format, including LZ2.