We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

N-SPC Engine/Nintendo/Koji Kondo/SFX Sequence Format

From SnesLab
Revision as of 02:15, 6 December 2020 by KungFuFurby (talk | contribs) (Updating SFX sequence notes to reflect a recent analysis... and how these aren't matching at all.)
Jump to: navigation, search

Go back to N-SPC Engine/Prototype

The SFX sequence data is slightly modified compared to the standard N-SPC's voice command format. These are headerless, unlike a song, and they only support one channel at a time, with the channel used being fixed. Both games have almost the same command set except for VCMD $FF.

All SFX are initially handled at a tempo of $38.

VCMD ID Description Arguments
$00 End of SFX
$01-$7F Note Duration (xx) (yy)
$80-$C5 Note
$C6-$CF Retrigger Note
$D0-$D9 Percussion
$DA Instrument xx
$DB-$DC Invalid Note
$DD Pitch Slide to Note xx yy zz aa
$DE-$EA Invalid Note
$EB Note Pitch Envelope To xx yy zz
$EC-$FE Invalid Note
$FF Restart SFX (Super Mario World CPUIO0)
$FF Jump Back One Byte (Super Mario World CPUIO3)
$FF Jump to SFX ID (Pilotwings) xx

SFX Instrument Format

The SFX instrument format, shared among all SFX but not consistently stored in terms of memory location, consists of a series of bytes corresponding to direct DSP register writes to the following in order (with the last one not being a DSP register write at all)...

  • VxVOLL
  • VxVOLR
  • VxPITCHL
  • VxPITCHH
  • VxSRCN
  • VxADSR1
  • VxADSR2
  • VxGAIN
  • Pitch Base Multiplier

SFX Percussion Format

This is identical to the music percussion format.

SFX Voice Command Format

Invalid Note (VCMD $DB-$DC, $DE-$EA, $EC-$FE)

Doesn't crash the sound driver, but does play an invalid note.

End of SFX (VCMD $00)

Terminates the SFX.

Note Duration (VCMD $01-$7F)

%0xxxxxxx (yy) (zz)
  • xxxxxxx represents your note length (as seven bits) in tempo ticks.
  • yy, if less than $80, represents the volume of the note. If a second byte is defined, this is done for the left channel, otherwise it is for both channels.
  • zz, if less than $80, represents the right volume of the note.

Note (VCMD $80-$C5)

Plays a note and delays the channel for one note length before reading another VCMD.

Retrigger Note (VCMD $C6-$CF)

Retriggers the previous note and delays the channel for one note length before reading another VCMD.

Note that as a side effect of this, there is no tie or rest command. Rests can be emulated via a zero volume note. Ties... well, officially they're not supported at all, but if the pitch slide length equals or exceeds the note duration, then the note won't be keyed off once the note length has elapsed.

Percussion (VCMD $D0-$D9)

Plays a percussion note. Unlike SFX, percussion uses the same set that the music uses, and thus has the same instrument format as that.

Instrument (VCMD $DA)

$DA xx
  • xx is an instrument ID to an array of instruments. See SFX Instrument Format above for the format.
    • For Super Mario World through the CPUIO3 register only, if this value is above $7F, noise is used, and the lowest five bits contains the noise clock rate.

Pitch Slide To Note (VCMD $DD)

$DD xx yy zz aa
  • xx is the starting note.
  • yy defines the number of tempo ticks to delay the slide for... at least in theory. In reality, this never works, and the pitch slide executes instantly in all cases.
  • zz defines the length of the pitch slide in tempo ticks.
  • aa is the target note.

Note Pitch Envelope To (VCMD $EB)

$EB xx yy zz
  • xx is the number of ticks to delay before applying the pitch envelope.
  • yy is the length of the pitch slide in tempo ticks... at least in theory. In reality, this never works, and the pitch slide executes instantly in all cases.
  • zz is the target note.

Restart SFX (VCMD $FF)

Only compatible with Super Mario World when playing SFX through the CPUIO0 register.

Restarts the SFX from the beginning.

Jump Back One Byte (VCMD $FF)

Only compatible with Super Mario World when playing SFX through the CPUIO3 register.

Normally, the pointer is incremented upon reading the VCMD. This causes the inverse to happen, and sets the pointer to one byte before this VCMD.

Jump to SFX ID (VCMD $FF)

Only compatible with Pilotwings.

$FF xx
  • xx is the SFX ID to jump to. The array used depends on which set of sequences you're using, as the two of them use different sets.