We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
GETBL (Super FX)
From SnesLab
(Redirected from GETBL)
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | ROM Speed | RAM Speed | Cache Speed | ||
| Implied (type 1) | 3EEF | 2 bytes | 6 to 10 cycles | 6 to 9 cycles | 2 to 6 cycles | ||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| B | ALT1 | ALT2 | O/V | S | CY | Z | ||
| 0 | 0 | 0 | . | . | . | . | ||
GETBL (Get Byte Low) is a Super FX instruction that loads one byte from the ROM buffer into the low byte of the destination register. GETBL also loads the high byte of the source register into the high byte of the destination register.
The reason the cycle times can vary is because of the ROM buffer. The ALT0 state is restored.
The source and destination registers should be specified in advance using WITH, FROM, or TO. Otherwise, R0 serves as the default.
Syntax
GETBL
Example
Let:
(ROM Buffer) = 75h Sreg : R2 Dreg : R6 R2 = 4abdh
After executing GETBL:
R6 = 4a75h
See Also
External Links
- Official Super Nintendo development manual on GETBL: 9.37 on page 2-9-53 of Book II
- example: page 2-9-54 of Book II, lbid