We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
MOV1 (SPC700)
From SnesLab
(Redirected from MOV1)
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Absolute Boolean Bit | AA | 3 bytes | 4 cycles | ||||
| Absolute Boolean Bit | CA | 3 bytes | 6 cycles | ||||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| Direction | N | V | P | B | H | I | Z | C |
| to carry | . | . | . | . | . | . | . | C |
| from carry | . | . | . | . | . | . | . | . |
MOV1 is an SPC700 command that moves a memory bit to or from the carry flag. The low 13 bits of the operand byte specify an absolute address. The high 3 bits of the operand byte specify which bit at that absolute address.
The operands are stored in the instruction stream in the opposite order they appear in the assembler source. In the assembler source, the operand on the right is the source and the operand on the left is the destination.
No flags are affected except when moving to the carry flag.
Syntax
MOV1 C, mem. bit MOV1 mem. bit, C
See Also
External Links
- Official Super Nintendo development manual on MOV1: Table C-18 in Appendix C-9 of Book I
- subparagraph 8.2.3.3 of page 3-8-8, lbid.
- anomie: https://github.com/yupferris/TasmShiz/blob/master/spc700.txt#L504