We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
BRK (SPC700)
From SnesLab
(Redirected from SPC/BRK)
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Stack / Interrupt | 0F | 1 byte | 8 cycles | ||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | P | B | H | I | Z | C |
| . | . | . | 1 | . | 0 | . | . |
BRK is an SPC700 instruction that triggers a software interrupt. The program counter and flags are pushed to the stack. The program counter then jumps to the address stored at $FFDE.
Syntax
BRK
BRK very well could be the only interrupt source on the S-SMP. It is the only instruction to unconditionally set the break flag.
According to fullsnes, EI and DI have no effect other than toggling the interrupt enable flag, so the SPC700's BRK seems to be non-maskable like the 65c816's BRK.
To return from the interrupt handler, use RETI.
See Also
References
- Table C-16 in Appendix C-9 of Book I of the official Super Nintendo development manual
- anomie's SPC700 doc