We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
TSET1 (SPC700)
From SnesLab
(Redirected from SPC/TSET1)
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Absolute | 0E | 3 bytes | 6 cycles | ||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | P | B | H | I | Z | C |
| N | . | . | . | . | . | Z | . |
TSET1 is an SPC700 instruction that tests and sets memory bits using the accumulator. For every set bit in the accumulator, TSET1 sets the corresponding memory bit. In other words, a logical OR is performed.
Syntax
TSET1 !abs
Where abs is any address in the whole 64K bank of ARAM.
See Also
External Links
- Official Super Nintendo development manual on TSET1: Table C-18 in Appendix C-9 of Book I
- subparagraph 8.2.3.2 of page 3-8-8, lbid.
- anomie: https://github.com/yupferris/TasmShiz/blob/master/spc700.txt#L607