We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
LOOP (Super FX): Difference between revisions
From SnesLab
(added example) |
(Z) |
||
| Line 26: | Line 26: | ||
|[[Sign Flag|S]] | |[[Sign Flag|S]] | ||
|[[CY]] | |[[CY]] | ||
|Z | |[[Zero Flag|Z]] | ||
|+ | |+ | ||
|0 | |0 | ||
Revision as of 21:00, 12 July 2024
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | ROM Speed | RAM Speed | Cache Speed | ||
| Implied (type 1) | 3C | 1 byte | 3 cycles | 3 cycles | 1 cycle | ||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| B | ALT1 | ALT2 | O/V | S | CY | Z | ||
| 0 | 0 | 0 | . | . | ||||
LOOP is a Super FX instruction that decrements R12. If the zero flag is set afterwards, R15 is incremented. Otherwise, R13 is stored to R15.
The next instruction after LOOP is already loaded into the pipeline.
Syntax
LOOP
Example
In this program:
00:8014 INC R7 00:8015 INC R6 00:8016 LOOP 00:8017 NOP 00:8018 ADD R4
If R13 is 8014h and R12 is not 0001h, the program jumps to 00:8014h after the NOP. If R12 is 0001h, the program does not jump and control falls through to the ADD.
External Links
- Official Nintendo documentation on LOOP: paragraph 9.54 on page 2-9-77 of Book II