We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

GETBL (Super FX): Difference between revisions

From SnesLab
Jump to: navigation, search
(made basic info table shorter)
(added image)
 
(23 intermediate revisions by the same user not shown)
Line 2: Line 2:
!colspan="8"|Basic Info
!colspan="8"|Basic Info
|+
|+
|'''Addressing Mode'''
|'''Opcode'''
|'''Opcode'''
|'''Length'''
|'''Length'''
Line 8: Line 9:
|'''Cache Speed'''
|'''Cache Speed'''
|+
|+
|[[Implied]] (type 1)
|3EEF
|3EEF
|2 bytes
|2 bytes
|6 to 10 cycles
|6 to 10 cycles
|6 to 9 cycles
|6 to 9 cycles
|2 to 6 cycle
|2 to 6 cycles
|}
|}


{| class="wikitable" style="float:right;clear:right;width:30%"
{| class="wikitable" style="float:right;clear:right;width:30%"
!colspan="9"|Flags Clobbered
!colspan="9"|Flags Affected
|+
|+
|B
|[[B Flag|B]]
|ALT1
|[[ALT1]]
|ALT2
|[[ALT2]]
|O/V
|[[O/V]]
|S
|[[Sign Flag|S]]
|CY
|[[CY]]
|Z
|[[Zero Flag|Z]]
|+
|+
|0
|0
Line 35: Line 37:
|}
|}


'''GETBL''' is a [[Super FX]] instruction that loads one byte from the ROM buffer.
'''GETBL''' (Get Byte Low) is a [[Super FX]] instruction that loads one byte from the [[ROM buffer]] into the low byte of the [[destination register]].  GETBL also loads the high byte of the [[source register]] into the high byte of the destination register.
 
The reason the cycle times can vary is because of the [[ROM buffer]].  The [[ALT0]] state is restored.
 
The source and destination registers should be specified in advance using [[WITH]], [[FROM]], or [[TO]]. Otherwise, R<sub>0</sub> serves as the default.
 
==== Syntax ====
<pre>
GETBL
</pre>
 
 
[[File:gsu getbl.png]]
 
==== Example ====
Let:
(ROM Buffer) = 75h
S<sub>reg</sub> : R<sub>2</sub>
D<sub>reg</sub> : R<sub>6</sub>
R<sub>2</sub> = 4abdh
After executing GETBL:
 
R<sub>6</sub> = 4a75h


=== See Also ===
=== See Also ===
* [[GETB]]
* [[GETB]]
* [[GETBH]]
* [[GETBH]]
* [[GETBS]]
* [[GETC]]
* [[ALT2]]


=== External Links ===
=== External Links ===
* Official Nintendo documentation on GETBL: [https://archive.org/details/SNESDevManual/book2/page/n209 page 2-9-53 of Book II]
* Official Super Nintendo development manual on GETBL: 9.37 on [https://archive.org/details/SNESDevManual/book2/page/n209 page 2-9-53 of Book II]
* example: [https://archive.org/details/SNESDevManual/book2/page/n210 page 2-9-54 of Book II], lbid
 


[[Category:ASM]]
[[Category:ASM]]
[[Category:Super FX]]
[[Category:Super FX]]
[[Category:Data Transfer Instructions]]
[[Category:Data Transfer Instructions]]
[[Category:Two-byte Instructions]]
[[Category:Expects Sreg/Dreg Prearranged]]

Latest revision as of 22:19, 16 July 2024

Basic Info
Addressing Mode Opcode Length ROM Speed RAM Speed Cache Speed
Implied (type 1) 3EEF 2 bytes 6 to 10 cycles 6 to 9 cycles 2 to 6 cycles
Flags Affected
B ALT1 ALT2 O/V S CY Z
0 0 0 . . . .

GETBL (Get Byte Low) is a Super FX instruction that loads one byte from the ROM buffer into the low byte of the destination register. GETBL also loads the high byte of the source register into the high byte of the destination register.

The reason the cycle times can vary is because of the ROM buffer. The ALT0 state is restored.

The source and destination registers should be specified in advance using WITH, FROM, or TO. Otherwise, R0 serves as the default.

Syntax

GETBL


gsu getbl.png

Example

Let:

(ROM Buffer) = 75h
Sreg : R2
Dreg : R6
R2 = 4abdh

After executing GETBL:

R6 = 4a75h

See Also

External Links