RTI: Difference between revisions

Revision as of 14:43, 22 July 2024


Basic Info
Addressing Mode	Opcode	Length	Speed
Stack (RTI)	40	1 byte	7 cycles*


Flags Affected
	N	V	M	X	D	I	Z	C
65c816 native mode
6502 emulation mode			.	.

RTI (ReTurn from Interrupt) is a 65x instruction used to return control from an interrupt handler. It does this by first pulling the flags off of the stack and then the program counter too.

Syntax

RTI

Pitfalls

RTI should only be run when the e flag is in the same state as when the interrupt fired
RTI cannot even tell whether the interrupt actually occurred or not

Cycle Skipped

RTI takes one fewer cycle in emulation mode as the program bank register doesn't need to be pulled from the stack.

External Links

Eyes & Lichty page 492, on RTI: https://archive.org/details/0893037893ProgrammingThe65816/page/492
Labiak page 176 on RTI: https://archive.org/details/Programming_the_65816/page/n186
MCS6500 Manual page 132 on RTI: https://archive.org/details/mos_microcomputers_programming_manual/page/n152
Carr page 270 on RTI: https://archive.org/details/6502UsersManual/page/n283
Leventhal page 3-89 on RTI: https://archive.org/details/6502-assembly-language-programming/page/n138
snes9x implementation of RTI: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L3272
undisbeliever on RTI: https://undisbeliever.net/snesdev/65816-opcodes.html#rti-return-from-interrupt
Pickens, John. http://www.6502.org/tutorials/6502opcodes.html#RTI
Clark, Bruce. http://www.6502.org/tutorials/65c816opcodes.html#6.3.2

@@ Line 76: / Line 76: @@
 * undisbeliever on RTI: https://undisbeliever.net/snesdev/65816-opcodes.html#rti-return-from-interrupt
 * Pickens, John. http://www.6502.org/tutorials/6502opcodes.html#RTI
+* Clark, Bruce. http://www.6502.org/tutorials/65c816opcodes.html#6.3.2
 [[Category:ASM]]