We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
BIC (Super FX): Difference between revisions
From SnesLab
(blurb about specifying sreg/dreg in advance) |
(made flags affected more prominent) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 33: | Line 33: | ||
|[[Sign Flag|S]] | |[[Sign Flag|S]] | ||
|[[CY]] | |[[CY]] | ||
|Z | |[[Zero Flag|Z]] | ||
|+ | |+ | ||
|0 | |0 | ||
| Line 39: | Line 39: | ||
|0 | |0 | ||
|. | |. | ||
| | |S | ||
|. | |. | ||
| | |Z | ||
|} | |} | ||
'''BIC''' (BIt Clear mask) is a [[Super FX]] instruction that performs a logical AND between the [[source register]] and the 1's complement of the operand. The conjunction is stored in the [[destination register]]. | '''BIC''' (BIt Clear mask) is a [[Super FX]] instruction that performs a logical AND between the [[source register]] and the 1's complement of the operand. The conjunction is stored in the [[destination register]]. | ||
The [[ALT0]] state is restored. | |||
The source and destination registers should be specified in advance using [[WITH]], [[FROM]], or [[TO]]. Otherwise, R<sub>0</sub> serves as the default. | The source and destination registers should be specified in advance using [[WITH]], [[FROM]], or [[TO]]. Otherwise, R<sub>0</sub> serves as the default. | ||
Latest revision as of 18:38, 30 July 2024
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | ROM Speed | RAM Speed | Cache Speed | ||
| Implied (type 1) | 3D7n | 2 bytes | 6 cycles | 6 cycles | 2 cycles | ||
| Immediate | 3F7n | 2 bytes | 6 cycles | 6 cycles | 2 cycles | ||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| B | ALT1 | ALT2 | O/V | S | CY | Z | ||
| 0 | 0 | 0 | . | S | . | Z | ||
BIC (BIt Clear mask) is a Super FX instruction that performs a logical AND between the source register and the 1's complement of the operand. The conjunction is stored in the destination register.
The ALT0 state is restored.
The source and destination registers should be specified in advance using WITH, FROM, or TO. Otherwise, R0 serves as the default.
Syntax
BIC Rn BIC #n
Example 1
Let:
Sreg : R2 Dreg : R0 R2 = 75ceh (0111 0101 1100 1110b) R1 = 3846h (0011 1000 0100 0110b)
After executing BIC R1:
R0 = 4588h (0100 0101 1000 1000b)
Example 2
Let:
Sreg : R4 Dreg : R5 R4 = 364bh (0011 0110 0100 1011b)
After BIC #F is executed:
R5 = 3640h (0011 0110 0100 0000b)
See Also
External Links
- Official Nintendo documentation on BIC: 9.18 on Page 2-9-22 of Book II
- immediate BIC: 9.19 on page 2-9-23, lbid.