We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

PLD: Difference between revisions

From SnesLab
Jump to: navigation, search
(→‎External Links: hid archive URL for Labiak)
(how much stack pointer incremented by)
 
(One intermediate revision by the same user not shown)
Line 35: Line 35:
|}
|}


'''PLD''' (PulL Direct page) is a [[65c816]] instruction that pulls the 16-bit value at the top of the [[stack]] into the [[direct page register]].  The low byte of this register is pulled first.  After PLD completes, the [[stack pointer]] is pointing to where the high byte was, which becomes the next available stack location.
'''PLD''' (PulL Direct page) is a [[65c816]] instruction that pulls the 16-bit value at the top of the [[stack]] into the [[direct page register]], relocating the [[direct page]].  The low byte of this register is pulled first and then the high byteThe [[stack pointer]] is incremented by two and ends up pointing to where the high byte was, which becomes the next available stack location.


==== Syntax ====
==== Syntax ====
Line 41: Line 41:
PLD
PLD
</pre>
</pre>
PLD works even in [[emulation mode]], and instructions that used [[zero page addressing]] on the 6502 will use [[direct page addressing]] instead with the direct offset still added into their effective address.


=== See Also ===
=== See Also ===

Latest revision as of 01:25, 13 August 2024

Basic Info
Addressing Mode Opcode Length Speed
Stack (Pull) 2B 1 byte 5 cycles
Flags Affected
N V M X D I Z C
N . . . . . Z .

PLD (PulL Direct page) is a 65c816 instruction that pulls the 16-bit value at the top of the stack into the direct page register, relocating the direct page. The low byte of this register is pulled first and then the high byte. The stack pointer is incremented by two and ends up pointing to where the high byte was, which becomes the next available stack location.

Syntax

PLD

PLD works even in emulation mode, and instructions that used zero page addressing on the 6502 will use direct page addressing instead with the direct offset still added into their effective address.

See Also

External Links