We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
TSET1 (SPC700): Difference between revisions
From SnesLab
m (pluralize bytes) |
(→Syntax: abs is any address) |
||
| Line 41: | Line 41: | ||
TSET1 !abs | TSET1 !abs | ||
</pre> | </pre> | ||
Where abs is any address in the whole 64K bank. | |||
=== See Also === | === See Also === | ||
Revision as of 01:48, 13 July 2024
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Absolute | 0E | 3 bytes | 6 cycles | ||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | P | B | H | I | Z | C |
| . | . | . | . | . | . | ||
TSET1 is an SPC700 instruction that tests and sets memory bits using the accumulator. For every set bit in the accumulator, the corresponding memory bit is also set.
Syntax
TSET1 !abs
Where abs is any address in the whole 64K bank.
See Also
External Links
- Official Super Nintendo development manual on TSET1: Table C-18 in Appendix C-9 of Book I
- subparagraph 8.2.3.2 of page 3-8-8, lbid.