We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
TSET1 (SPC700): Difference between revisions
From SnesLab
(→Syntax: abs is any address) |
(→Syntax: linkify bank) |
||
| Line 41: | Line 41: | ||
TSET1 !abs | TSET1 !abs | ||
</pre> | </pre> | ||
Where abs is any address in the whole 64K bank. | Where abs is any address in the whole 64K [[bank]]. | ||
=== See Also === | === See Also === | ||
Revision as of 06:31, 13 July 2024
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Absolute | 0E | 3 bytes | 6 cycles | ||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | P | B | H | I | Z | C |
| . | . | . | . | . | . | ||
TSET1 is an SPC700 instruction that tests and sets memory bits using the accumulator. For every set bit in the accumulator, the corresponding memory bit is also set.
Syntax
TSET1 !abs
Where abs is any address in the whole 64K bank.
See Also
External Links
- Official Super Nintendo development manual on TSET1: Table C-18 in Appendix C-9 of Book I
- subparagraph 8.2.3.2 of page 3-8-8, lbid.