We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
DI (SPC700): Difference between revisions
From SnesLab
(→See Also: CLI) |
(no hardware interrupt) |
||
| Line 39: | Line 39: | ||
The manual has a typo where the flag which is cleared is in the [[zero flag]]'s position instead. | The manual has a typo where the flag which is cleared is in the [[zero flag]]'s position instead. | ||
As the [[S-SMP]] has no interrupt sources, DI is not very useful. | As the [[S-SMP]] has no hardware interrupt sources, DI is not very useful. | ||
==== Syntax ==== | ==== Syntax ==== | ||
Revision as of 04:40, 22 July 2024
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Implied (type 2) | C0 | 1 byte | 3 cycles | ||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | P | B | H | I | Z | C |
| . | . | . | . | . | 0 | . | . |
DI (Disable Interrupts) is an SPC700 instruction that clears the interrupt enable flag.
The manual has a typo where the flag which is cleared is in the zero flag's position instead.
As the S-SMP has no hardware interrupt sources, DI is not very useful.
Syntax
DI
See Also
External Links
- Official Super Nintendo development manual on DI: Table C-19 in Appendix C-10 of Book I
- anomie: https://github.com/yupferris/TasmShiz/blob/master/spc700.txt#L424