We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

XCE: Difference between revisions

From SnesLab
Jump to: navigation, search
(added image)
(→‎External Links: Clark link)
Line 75: Line 75:
* snes9x implementation of XCE: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L2517
* snes9x implementation of XCE: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L2517
* undisbeliever on XCE: https://undisbeliever.net/snesdev/65816-opcodes.html#xce-exchange-carry-and-emulation-bits
* undisbeliever on XCE: https://undisbeliever.net/snesdev/65816-opcodes.html#xce-exchange-carry-and-emulation-bits
* Clark, Bruce. http://www.6502.org/tutorials/65c816opcodes.html#6.10.4


[[Category:ASM]]
[[Category:ASM]]

Revision as of 14:35, 22 July 2024

Basic Info
Addressing Mode Opcode Length Speed
Implied (type 2) FB 1 byte 2 cycles
Flags Affected
N V M X D I Z C E
. . . . . E C

XCE is a 65c816 instruction that exchanges the carry and emulation bits. It typically appears soon after the Reset Vector following a CLC, to switch the S-CPU into 65c816 native mode. The carry flag was chosen because:

  • it is easy to set and clear
  • it is used less frequently than the negative and zero flags
  • it can be tested with BCC and BCS

Syntax

XCE

Examples

Switching to native mode:

CLC
XCE

Switching to emulation mode:

SEC
XCE

xce.png

See Also

External Links