ADC

Basic Info
Addressing Mode	Opcode	Length	Speed
Immediate	69	2 bytes	2 cycles*
Absolute	6D	3 bytes	4 cycles*
Absolute Long	6F	4 bytes	5 cycles*
Direct Page	65	2 bytes	3 cycles*
Direct Page Indirect	72	2 bytes	5 cycles*
Direct Page Indirect Long	67	2 bytes	6 cycles*
Absolute Indexed by X	7D	3 bytes	4 cycles*
Absolute Long Indexed by X	7F	4 bytes	5 cycles*
Absolute Indexed by Y	79	3 bytes	4 cycles*
Direct Page Indexed by X	75	2 bytes	4 cycles*
Direct Page Indexed Indirect by X	61	2 bytes	6 cycles*
Direct Page Indirect Indexed by Y	71	2 bytes	5 cycles*
Direct Page Indirect Long Indexed by Y	77	2 bytes	6 cycles*
Stack Relative	63	2 bytes	4 cycles*
Stack Relative Indirect Indexed by Y	73	2 bytes	7 cycles*

Flags Affected
N	V	M	X	D	I	Z	C
		.	.	.	.

ADC (Add with Carry) is 65x instruction that performs an addition. As there is no add-without-carry instruction, a CLC should be run (or the carry flag otherwise ensured to be clear) before an ADC, or else the sum will be one greater than expected.

After ADC runs, the carry flag will indicate whether the addition caused an unsigned overflow.

See Also

• SBC
• ADC (SPC700)
• ADC (Super FX)

External Links

• Eyes & Lichty page 423, on ADC: https://archive.org/details/0893037893ProgrammingThe65816/page/n449
• Labiak page 115 on ADC: https://archive.org/details/Programming_the_65816/page/n125
• MCS6500 Manual page 7 on ADC: https://archive.org/details/mos_microcomputers_programming_manual/page/n22
• https://archive.org/details/mos_microcomputers_programming_manual/page/n204, lbid.
• Carr page 245 on ADC: https://archive.org/details/6502UsersManual/page/n258
• Leventhal page 3-38 on ADC: https://archive.org/details/6502-assembly-language-programming/page/n87
• undisbeliever on ADC: https://undisbeliever.net/snesdev/65816-opcodes.html#adc-add-with-carry