We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
COP
From SnesLab
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Stack | 02 | 2 bytes | 8 cycles* | ||||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| N | V | M | X | D | I | Z | C | |
| . | . | . | . | 0 | 1 | . | . | |
COP (Co-Processor) is a 65c816 instruction designed to run a co-processor command. The byte following the opcode is called the Signature Byte. Signature bytes of 80h to FFh are reserved by the Western Design Center. The state of the interrupt disable flag has no effect on the behavior of COP.
Cycle Skipped
- COP takes one fewer cycle in emulation mode as it doesn't need to push the program counter bank register to the stack.
See Also
External Links
- Eyes & Lichty page 447, on COP: https://archive.org/details/0893037893ProgrammingThe65816/page/n473
- Labiak page 135 on COP: https://archive.org/details/Programming_the_65816/page/n145
- snes9x implementation of COP: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L2738