We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
STB (Super FX)
From SnesLab
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | ROM Speed | RAM Speed | Cache Speed | ||
| Implied Indirect | 3D3m | 2 bytes | 6 to 9 cycles | 8 to 14 cycles | 2 to 5 cycles | ||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| B | ALT1 | ALT2 | O/V | S | CY | Z | ||
| 0 | 0 | 0 | . | . | . | . | ||
STB (Store Byte) is a Super FX instruction that stores the low byte of the source register to the Game Pak. STB expects the target address to be in the Rm register. The bank must be specified with RAMB.
The operand may be any register from R0 to R11. The number of cycles can vary because of the RAM buffer.
The source register should be specified in advance using WITH or FROM. Otherwise, R0 serves as the default.
The ALT0 state is restored.
Syntax
STB (Rm)
Example
Let:
Sreg : R5 R5 = 216ch R8 = 9a34h RAMBR = 70h
After STB (R8) is executed:
(70:9A34h) = 6ch
See Also
External Links
- Official Super Nintendo development manual on STB: 9.83 on page 2-9-115