We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
PHB
From SnesLab
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Stack (Push) | 8B | 1 byte | 3 cycles | ||||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| N | V | M | X | D | I | Z | C | |
| . | . | . | . | . | . | . | . | |
PHB (PusH data Bank register) is a 65c816 instruction that pushes the value of the data bank register to the stack. PHB always pushes one byte. The stack pointer is decremented by one and ends up pointing directly below the byte pushed.
No flags are affected.
Syntax
PHB
PHB works even in emulation mode even though all bank addresses are forced to zero.[4]
See Also
External Links
- Eyes & Lichty, page 477 on PHB
- Labiak, page 161 on PHB
- Clark, Bruce. http://www.6502.org/tutorials/65c816opcodes.html#6.8.3
- section 7.8.2 of 65c816 datasheet