We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

AND1 (SPC700): Difference between revisions

From SnesLab
Jump to: navigation, search
(13-bit -> Absolute Boolean Bit)
(bit reversal)
Line 41: Line 41:


'''AND1''' is an [[SPC700]] instruction that performs a logical AND between a memory bit and the [[carry flag]], then stores the conjunction in the carry flag.  The low 13 bits of the operand specify an absolute address.  The high 3 bits of the operand specify which bit at that absolute address.
'''AND1''' is an [[SPC700]] instruction that performs a logical AND between a memory bit and the [[carry flag]], then stores the conjunction in the carry flag.  The low 13 bits of the operand specify an absolute address.  The high 3 bits of the operand specify which bit at that absolute address.
The [[bit reversal]] operator may be prefixed to the memory bit address, in which case opcode 6A is assembled.


=== See Also ===
=== See Also ===

Revision as of 08:58, 18 December 2023

Basic Info
Addressing Mode Opcode Length Speed
Absolute Boolean Bit 4A 3 bytes 4 cycles
Absolute Boolean Bit 6A 3 bytes 4 cycles
Flags Affected
N V P B H I Z C
. . . . . . .

AND1 is an SPC700 instruction that performs a logical AND between a memory bit and the carry flag, then stores the conjunction in the carry flag. The low 13 bits of the operand specify an absolute address. The high 3 bits of the operand specify which bit at that absolute address.

The bit reversal operator may be prefixed to the memory bit address, in which case opcode 6A is assembled.

See Also

External Links