PHA
From SnesLab
Basic Info | |||||||
---|---|---|---|---|---|---|---|
Addressing Mode | Opcode | Length | Speed | ||||
Stack (Push) | 48 | 1 byte | 3 cycles* |
Flags Affected | ||||||||
---|---|---|---|---|---|---|---|---|
N | V | M | X | D | I | Z | C | |
. | . | . | . | . | . | . | . |
PHA (PusH Accumulator) is a 65x instruction that pushes the value in the accumulator to the stack. If the accumulator is 16 bits wide, the high byte is pushed first. The stack pointer is decremented by the number of bytes pushed.
No flags are affected.
Syntax
PHA
Cycle Penalty
- PHA takes one extra cycle if the accumulator is 16 bits wide.
See Also
External Links
- Eyes & Lichty, page 476 on PHA
- Labiak, page 160 on PHA
- 8.5 on MCS6500 Manual, page 117 on PHA
- Carr, page 267 on PHA
- Leventhal, page 3-81 on PHA