We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

GETBH (Super FX): Difference between revisions

From SnesLab
Jump to: navigation, search
(added image)
 
(18 intermediate revisions by the same user not shown)
Line 2: Line 2:
!colspan="8"|Basic Info
!colspan="8"|Basic Info
|+
|+
|'''Addressing Mode'''
|'''Opcode'''
|'''Opcode'''
|'''Length'''
|'''Length'''
Line 8: Line 9:
|'''Cache Speed'''
|'''Cache Speed'''
|+
|+
|[[Implied]] (type 1)
|3DEF
|3DEF
|2 bytes
|2 bytes
|6 to 10 cycles
|6 to 10 cycles
|6 to 9 cycles
|6 to 9 cycles
|2 to 6 cycle
|2 to 6 cycles
|}
|}


Line 18: Line 20:
!colspan="9"|Flags Affected
!colspan="9"|Flags Affected
|+
|+
|B
|[[B Flag|B]]
|[[ALT1]]
|[[ALT1]]
|[[ALT2]]
|[[ALT2]]
|[[O/V]]
|[[O/V]]
|S
|[[Sign Flag|S]]
|[[CY]]
|[[CY]]
|Z
|[[Zero Flag|Z]]
|+
|+
|0
|0
Line 36: Line 38:


'''GETBH''' (Get Byte High) is a [[Super FX]] instruction that loads one byte from the [[ROM buffer]] into the high byte of the [[destination register]] and the low byte of the [[source register]] into the low byte of the destination register.
'''GETBH''' (Get Byte High) is a [[Super FX]] instruction that loads one byte from the [[ROM buffer]] into the high byte of the [[destination register]] and the low byte of the [[source register]] into the low byte of the destination register.
The reason the cycle times can vary is because of the [[ROM buffer]].  The [[ALT0]] state is restored.
The source and destination registers should be specified in advance using [[WITH]], [[FROM]], or [[TO]].  Otherwise, R<sub>0</sub> serves as the default.
==== Syntax ====
<pre>
GETBH
</pre>
[[File:gsu_getbh.png]]
==== Example ====
Let:
(ROM buffer) = 75h
S<sub>reg</sub> : R<sub>2</sub>
D<sub>reg</sub> : R<sub>6</sub>
R<sub>2</sub> = 4abdh
After executing GETBH:
R<sub>6</sub> = 75bdh


=== See Also ===
=== See Also ===
* [[GETB]]
* [[GETB]]
* [[GETBL]]
* [[GETBL]]
* [[GETBS]]
* [[GETC]]
* [[MERGE]]
* [[ALT1]]


=== External Links ===
=== External Links ===
* Official Super Nintendo development manual on GETBH: 9.36 on [https://archive.org/details/SNESDevManual/book2/page/n207 Page 2-9-51 of Book II]
* Official Super Nintendo development manual on GETBH: 9.36 on [https://archive.org/details/SNESDevManual/book2/page/n207 page 2-9-51 of Book II]


* example: [https://archive.org/details/SNESDevManual/book2/page/n208 page 2-9-52 of Book II], lbid
* example: [https://archive.org/details/SNESDevManual/book2/page/n208 page 2-9-52 of Book II], lbid
Line 50: Line 76:
[[Category:Data Transfer Instructions]]
[[Category:Data Transfer Instructions]]
[[Category:Two-byte Instructions]]
[[Category:Two-byte Instructions]]
[[Category:Expects Sreg/Dreg Prearranged]]

Latest revision as of 22:27, 16 July 2024

Basic Info
Addressing Mode Opcode Length ROM Speed RAM Speed Cache Speed
Implied (type 1) 3DEF 2 bytes 6 to 10 cycles 6 to 9 cycles 2 to 6 cycles
Flags Affected
B ALT1 ALT2 O/V S CY Z
0 0 0 . . . .

GETBH (Get Byte High) is a Super FX instruction that loads one byte from the ROM buffer into the high byte of the destination register and the low byte of the source register into the low byte of the destination register.

The reason the cycle times can vary is because of the ROM buffer. The ALT0 state is restored.

The source and destination registers should be specified in advance using WITH, FROM, or TO. Otherwise, R0 serves as the default.

Syntax

GETBH

gsu getbh.png

Example

Let:

(ROM buffer) = 75h
Sreg : R2
Dreg : R6
R2 = 4abdh

After executing GETBH:

R6 = 75bdh

See Also

External Links