We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

MVN: Difference between revisions

From SnesLab
Jump to: navigation, search
(→‎External Links: hid archive URL for E&L)
(→‎External Links: hid archive URL for Labiak)
 
Line 73: Line 73:
=== External Links ===
=== External Links ===
* [[Eyes & Lichty]], [https://archive.org/details/0893037893ProgrammingThe65816/page/466 page 466] on MVN
* [[Eyes & Lichty]], [https://archive.org/details/0893037893ProgrammingThe65816/page/466 page 466] on MVN
* [[Labiak]] page 153 on MVN: https://archive.org/details/Programming_the_65816/page/n163
* [[Labiak]], [https://archive.org/details/Programming_the_65816/page/n163 page 153] on MVN
* snes9x implementation of MVN: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L3011
* snes9x implementation of MVN: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L3011
* undisbeliever on MVN: https://undisbeliever.net/snesdev/65816-opcodes.html#mvn-block-move-next
* undisbeliever on MVN: https://undisbeliever.net/snesdev/65816-opcodes.html#mvn-block-move-next

Latest revision as of 20:27, 6 August 2024

Basic Info
Addressing Mode Opcode Length Speed
Block Move 54 3 bytes 7 cycles per byte moved
mvn.png
Flags Affected
N V M X D I Z C
. . . . . . . .

MVN (Block Move Negative) is a 65c816 instruction that copies a contiguous block of memory. It is intended to copy a block from a higher address to a lower address (moving it in the negative direction). No flags are affected.

In Eyes & Lichty, the "N" in the mnemonic stands for "Next" not "Negative."

MVN works even in emulation mode, but the blocks must be in the zeropage.

Parameters

  • the X index register specifies the starting (lowest) source address of the block
  • the Y index register specifies the starting (lowest) destination address of the block
  • the C double accumulator specifies the length of the block in bytes minus one
  • the first operand byte specifies the destination bank the block will be in
  • the second operand byte specifies the source bank the block starts out in

Execution Sequence

The following loop is repeated until the value in the C double accumulator is $FFFF:

  • one byte is copied from the address in X to the address in Y
  • both X and Y are incremented
  • C is decremented

If interrupted, the current byte finishes copying before servicing the interrupt. The destination bank is written to DBR.

Assembler Syntax

Asar:

MVN srds

where "sr" is the source bank, and "ds" is the destination bank, with nothing in between them.[1]

See Also

External Links

References

  1. https://github.com/InsaneFirebat/sm_practice_hack/blob/master/src/custompresets.asm#L260