We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

APU Oscillator: Difference between revisions

From SnesLab
Jump to: navigation, search
(added audio category)
(ceramic osc)
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
The '''APU oscillator''' (X2) is clocked at 24.6 MHz.  Side 1 is XTALO and is connected to pin 45 of the [[S-DSP]].  Side 2 is XTALI and is connected to pin 46 of the [[S-DSP]].
[[File:APU_Oscillator_schematic.png|thumb|The APU oscillator (X2) is in region 3C of the [[jwdonal schematic]]]]


It does not clock the [[SPC700]].
The '''APU oscillator''' (X2) is clocked at 24.6 MHz, slightly faster than the [[master clock]].
* Side 1 is XTALO, connected to pin 45 of the [[S-DSP]] and C72.
* Side 2 is XTALI, connected to pin 46 of the [[S-DSP]] and C71.


[[File:APU_Oscillator_schematic.png|thumb|The APU oscillator (X2) is in region 3C of the jwdonal schematic]]
It is not connected to anything else.  XTAL stands for "crystal," but according to a board photo<sup>[3]</sup> X2 is actually a ceramic oscillator.  It does not clock the [[S-SMP]] directly.


References
=== See Also ===
* [[OSC]]
* [[Bit Clock]]


* http://problemkaputt.de/fullsnes.htm#snestimingoscillators
=== References ===
# http://problemkaputt.de/fullsnes.htm#snestimingoscillators
# [https://archive.org/details/SNESDevManual/book1/page/n98 Figure 2-22-1 on page 2-22-2] of the official Super Nintendo development manual
# Sanglard, Fabien.  The Hearts of the Super Nintendo. https://fabiensanglard.net/snes_hearts


[[Category:SNES Hardware]]
[[Category:SNES Hardware]]
[[Category:Audio]]
[[Category:Audio]]
[[Category:Timing]]

Latest revision as of 19:10, 18 August 2024

The APU oscillator (X2) is in region 3C of the jwdonal schematic

The APU oscillator (X2) is clocked at 24.6 MHz, slightly faster than the master clock.

  • Side 1 is XTALO, connected to pin 45 of the S-DSP and C72.
  • Side 2 is XTALI, connected to pin 46 of the S-DSP and C71.

It is not connected to anything else. XTAL stands for "crystal," but according to a board photo[3] X2 is actually a ceramic oscillator. It does not clock the S-SMP directly.

See Also

References

  1. http://problemkaputt.de/fullsnes.htm#snestimingoscillators
  2. Figure 2-22-1 on page 2-22-2 of the official Super Nintendo development manual
  3. Sanglard, Fabien. The Hearts of the Super Nintendo. https://fabiensanglard.net/snes_hearts