We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
GETBS (Super FX): Difference between revisions
From SnesLab
(where it goes) |
(what happens to the high byte of Dreg) |
||
| Line 35: | Line 35: | ||
|} | |} | ||
'''GETBS''' is a [[Super FX]] instruction that loads one byte from the [[ROM buffer]] into the [[destination register]]. | '''GETBS''' is a [[Super FX]] instruction that loads one byte from the [[ROM buffer]] into the low byte of the [[destination register]]. Every bit of the high byte of the destination register becomes whatever bit 7 of that byte is. | ||
The reason the cycle times can vary is because of the ROM buffer. | The reason the cycle times can vary is because of the ROM buffer. | ||
Revision as of 00:40, 27 November 2023
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Opcode | Length | ROM Speed | RAM Speed | Cache Speed | |||
| 3FEF | 2 bytes | 6 to 10 cycles | 6 to 9 cycles | 2 to 6 cycle | |||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| B | ALT1 | ALT2 | O/V | S | CY | Z | ||
| 0 | 0 | 0 | . | . | . | . | ||
GETBS is a Super FX instruction that loads one byte from the ROM buffer into the low byte of the destination register. Every bit of the high byte of the destination register becomes whatever bit 7 of that byte is.
The reason the cycle times can vary is because of the ROM buffer.
See Also
External Links
- Official Super Nintendo development manual on GETBS: Page 2-9-55 of Book II