We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

APU Oscillator: Difference between revisions

From SnesLab
Jump to: navigation, search
(S-DSP is not connected to MCK so it has to be getting its clock from the APU OSC)
(connected to capacitors)
Line 2: Line 2:


The '''APU oscillator''' (X2) is clocked at 24.6 MHz, slightly faster than the [[master clock]].
The '''APU oscillator''' (X2) is clocked at 24.6 MHz, slightly faster than the [[master clock]].
* Side 1 is XTALO, connected to pin 45 of the [[S-DSP]].
* Side 1 is XTALO, connected to pin 45 of the [[S-DSP]] and C72.
* Side 2 is XTALI, connected to pin 46 of the [[S-DSP]].
* Side 2 is XTALI, connected to pin 46 of the [[S-DSP]] and C71.


XTAL stands for "crystal."  It does not clock the [[S-SMP]] directly.
It is not connected to anything else.  XTAL stands for "crystal."  It does not clock the [[S-SMP]] directly.


=== See Also ===
=== See Also ===

Revision as of 17:15, 18 August 2024

The APU oscillator (X2) is in region 3C of the jwdonal schematic

The APU oscillator (X2) is clocked at 24.6 MHz, slightly faster than the master clock.

  • Side 1 is XTALO, connected to pin 45 of the S-DSP and C72.
  • Side 2 is XTALI, connected to pin 46 of the S-DSP and C71.

It is not connected to anything else. XTAL stands for "crystal." It does not clock the S-SMP directly.

See Also

References