We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS

PLA: Difference between revisions

From SnesLab
Jump to: navigation, search
(mention E&L typo)
(order when accumulator is 16 bit)
Line 35: Line 35:
|}
|}


'''PLA''' (PulL Accumulator) is a 65x instruction that pulls the value at the top of the [[stack]] into the [[accumulator]].  PLA increments the [[stack pointer]] before the pull.
'''PLA''' (PulL Accumulator) is a 65x instruction that pulls the value at the top of the [[stack]] into the [[accumulator]].  PLA increments the [[stack pointer]] before the pull.  If the accumulator is 16 bits wide, the low byte is pulled and then the high byte is pulled.


The Eyes & Lichty page on PLA has a typo that says the 65x pull instructions "set" the zero and negative flags; it should say "affect."
The Eyes & Lichty page on PLA has a typo that says the 65x pull instructions "set" the zero and negative flags; it should say "affect."

Revision as of 21:47, 27 June 2024

Basic Info
Addressing Mode Opcode Length Speed
Stack (Pull) 68 1 byte 4 cycles*
Flags Affected
N V M X D I Z C
. . . . . .

PLA (PulL Accumulator) is a 65x instruction that pulls the value at the top of the stack into the accumulator. PLA increments the stack pointer before the pull. If the accumulator is 16 bits wide, the low byte is pulled and then the high byte is pulled.

The Eyes & Lichty page on PLA has a typo that says the 65x pull instructions "set" the zero and negative flags; it should say "affect."

Cycle Penalty
  • PLA takes one extra cycle if the accumulator is 16 bits wide.

See Also

External Links