We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
STP: Difference between revisions
From SnesLab
(note about e&l misprint?) |
(→See Also: reset traces) |
||
| Line 60: | Line 60: | ||
* [[STOP (SPC700)]] | * [[STOP (SPC700)]] | ||
* [[STOP (Super FX)]] | * [[STOP (Super FX)]] | ||
* [[Reset Traces]] | |||
=== External Links === | === External Links === | ||
Revision as of 10:20, 25 July 2024
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Implied (type 3) | DB | 1 byte | 3 cycles | ||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | M | X | D | I | Z | C |
| . | . | . | . | . | . | . | . |
STP (SToP-the-clock)[1] is an instruction that halts the 65c816, putting it into a low power state until it is reset. The PHI2 clock is held high.
No flags are affected.
Syntax
STP
Eyes & Lichty (at the bottom of page 504) claims that STP was first introduced on the 65802/816, but it is on the 65c02 datasheet.
See Also
External Links
- Eyes & Lichty page 504, on STP: https://archive.org/details/0893037893ProgrammingThe65816/page/504
- Labiak page 185 on STP: https://archive.org/details/Programming_the_65816/page/n195
- snes9x implementation of STP: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L3328
- undisbeliever on STP: https://undisbeliever.net/snesdev/65816-opcodes.html#stp-stop-the-processor
- Clark, Bruce. http://www.6502.org/tutorials/65c816opcodes.html#6.9
References
- Although "Stop The Processor" fits, all the letters in this mnemonic are from the word "stop." See row 58 of Table 5-1, "Instruction Set Table" on Page 21 of the official 65c02 datasheet: https://www.westerndesigncenter.com/wdc/documentation/w65c02s.pdf