We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
DAS (SPC700): Difference between revisions
From SnesLab
(linkify SBC) |
(perhaps not completely) |
||
| Line 36: | Line 36: | ||
'''DAS''' (Decimal Adjust for Subtraction) is an [[SPC700]] instruction that corrects a [[BCD]] difference: | '''DAS''' (Decimal Adjust for Subtraction) is an [[SPC700]] instruction that corrects a [[BCD]] difference: | ||
# If either the [[carry flag]] is clear or the accumulator exceeds 0x99, subtract 0x60 from the accumulator and clear the carry flag. This corrects the tens column. | # If either the [[carry flag]] is clear or the accumulator exceeds 0x99, subtract 0x60 from the accumulator and clear the carry flag. This corrects the tens column (but perhaps not completely). | ||
# Then, if either the [[half-carry flag]] is clear or the low nibble of the accumulator exceeds 0x09, subtract 0x06 from the accumulator. This corrects the ones column and possibly decrements the tens column by one. | # Then, if either the [[half-carry flag]] is clear or the low nibble of the accumulator exceeds 0x09, subtract 0x06 from the accumulator. This corrects the ones column and possibly decrements the tens column by one. | ||
Revision as of 08:46, 19 September 2024
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Accumulator | BE | 1 byte | 3 cycles | ||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | P | B | H | I | Z | C |
| N | . | . | . | . | . | Z | C |
DAS (Decimal Adjust for Subtraction) is an SPC700 instruction that corrects a BCD difference:
- If either the carry flag is clear or the accumulator exceeds 0x99, subtract 0x60 from the accumulator and clear the carry flag. This corrects the tens column (but perhaps not completely).
- Then, if either the half-carry flag is clear or the low nibble of the accumulator exceeds 0x09, subtract 0x06 from the accumulator. This corrects the ones column and possibly decrements the tens column by one.
Before DAS, the value in the accumulator is assumed to be encoded in binary/hexadecimal because that is what the SBC command outputs. Afterwards, the value in the accumulator will be encoded in BCD. The SPC700 has no decimal mode, so that is why this command is important when working with decimal data.
Syntax
DAS DAS A
See Also
External Links
- Official Super Nintendo development manual on DAS: Table C-14 in Appendix C-8 of Book I
- page 3-8-2 of Book I, lbid
- ares source code, SPC700::instructionDecimalAdjustSub
- anomie: https://github.com/yupferris/TasmShiz/blob/8fabc9764c33a7ae2520a76d80ed7220bb939f12/spc700.txt#L410