We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
GETB (Super FX)
From SnesLab
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | ROM Speed | RAM Speed | Cache Speed | ||
| Implied (type 1) | EF | 1 byte | 3 to 8 cycles | 3 to 9 cycles | 1 to 6 cycles | ||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| B | ALT1 | ALT2 | O/V | S | CY | Z | ||
| 0 | 0 | 0 | . | . | . | . | ||
GETB (Get Byte) is a Super FX instruction that loads one byte from the ROM buffer into the low byte of the destination register. The high byte of the destination register is zeroed.
R14 serves as the ROM address pointer.
The reason the cycle times can vary is because of the ROM buffer.
Syntax
GETB
Example
Let:
ROM buffer = 0075h Dreg : R0
After executing GETB:
R0 = 0075h
See Also
External Links
- Official Super Nintendo development manual on GETB: 9.35 on Page 2-9-49 of Book II
- example: page 2-9-50 of Book II, lbid