We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
PHP
From SnesLab
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Stack (Push) | 08 | 1 byte | 3 cycles | ||||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| N | V | M | X | D | I | Z | C | |
| . | . | . | .? | . | . | . | . | |
PHP is a 65x instruction that pushes the value of the processor status register onto the stack. The e bit is omitted from this operation. PHP always pushes a single byte.
The stack pointer will then point directly below the byte pushed.
No flags are affected according to Eyes & Lichty. But fullsnes claims that PHP always writes a one into the break flag.
Syntax
PHP
See Also
External Links
- Eyes & Lichty, page 480 on PHP
- Labiak, page 164 on PHP
- 8.11 on MCS6500 Manual, page 122 on PHP
- Carr, page 267 on PHP
- Leventhal, page 3-82 on PHP
- snes9x implementation of PHP: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L1844
- Clark, Bruce. http://www.6502.org/tutorials/65c816opcodes.html#6.8.3