We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
PEI
From SnesLab
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Stack (Direct Page Indirect) | D4 | 2 bytes | 6 cycles* | ||||
| Flags Affected | ||||||||
|---|---|---|---|---|---|---|---|---|
| N | V | M | X | D | I | Z | C | |
| . | . | . | . | . | . | . | . | |
PEI (Push Effective Indirect address) is a 65c816 instruction that pushes a 16-bit value to the stack. This value need not actually be an address. This value is found at the address formed by adding the operand byte to the direct page register. The high byte (found at the effective address plus one) is pushed first, then the low byte.
No flags are affected.
Syntax
PEI (dp) PEI dp
Cycle Penalty
- PEI takes one extra cycle if the low byte of the direct page register is nonzero.
See Also
External Links
- Eyes & Lichty, page 474 on PEI
- Labiak, page 158 on PEI
- snes9x implementation of PEI: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L1658
- undisbeliever on PEI: https://undisbeliever.net/snesdev/65816-opcodes.html#pei-push-effective-indirect-address
- how PEI behaves in emulation mode - section 7.2 of 65c816 datasheet: https://www.westerndesigncenter.com/wdc/documentation/w65c816s.pdf
- Clark, Bruce. http://www.6502.org/tutorials/65c816opcodes.html#6.8.1