We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
STP: Difference between revisions
From SnesLab
(→External Links: hid archive URL for E&L) |
(linkify cart slot) |
||
| Line 39: | Line 39: | ||
No flags are affected. | No flags are affected. | ||
Recall that the cartridge and [[expansion port]] can both reset the [[control deck]]. | Recall that the [[cartridge slot]] and [[expansion port]] can both reset the [[control deck]]. | ||
==== Syntax ==== | ==== Syntax ==== | ||
Latest revision as of 15:34, 20 August 2024
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Implied (type 3) | DB | 1 byte | 3 cycles | ||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | M | X | D | I | Z | C |
| . | . | . | . | . | . | . | . |
STP (SToP-the-clock)[1] is an instruction that halts the 65c816, putting it into a low power state until it is reset. The PHI2 clock is held high.
No flags are affected.
Recall that the cartridge slot and expansion port can both reset the control deck.
Syntax
STP
Eyes & Lichty (at the bottom of page 504) claims that STP was first introduced on the 65802/816, but it is on the 65c02 datasheet.
See Also
External Links
- Eyes & Lichty, page 504 on STP
- Labiak, page 185 on STP
- snes9x implementation of STP: https://github.com/snes9xgit/snes9x/blob/master/cpuops.cpp#L3328
- undisbeliever on STP: https://undisbeliever.net/snesdev/65816-opcodes.html#stp-stop-the-processor
- Clark, Bruce. http://www.6502.org/tutorials/65c816opcodes.html#6.9
References
- Although "Stop The Processor" fits, all the letters in this mnemonic are from the word "stop." See row 58 of Table 5-1, "Instruction Set Table" on Page 21 of the official 65c02 datasheet: https://www.westerndesigncenter.com/wdc/documentation/w65c02s.pdf