We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
SET1 (SPC700): Difference between revisions
From SnesLab
(added all opcodes) |
(→See Also: TSET1) |
||
| Line 74: | Line 74: | ||
=== See Also === | === See Also === | ||
* [[CLR1]] | * [[CLR1]] | ||
* [[TSET1]] | |||
=== External Links === | === External Links === | ||
Revision as of 06:46, 23 July 2023
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| 02 | 2 bytes | 4 cycles | |||||
| 22 | 2 bytes | 4 cycles | |||||
| 42 | 2 bytes | 4 cycles | |||||
| 62 | 2 bytes | 4 cycles | |||||
| 82 | 2 bytes | 4 cycles | |||||
| A2 | 2 bytes | 4 cycles | |||||
| C2 | 2 bytes | 4 cycles | |||||
| E2 | 2 bytes | 4 cycles | |||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | P | B | H | I | Z | C |
| . | . | . | . | . | . | . | . |
SET1 is an SPC700 command that sets a bit in a direct page byte. The byte following the opcode determines which byte. The high nibble of the opcode determines which bit within that byte.
See Also
External Links
- Official Nintendo documentation on SET1: Appendix C-9 of Book I
- http://www.ffviman.fr/switch-snes/sf-sound.html