We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
SET1 (SPC700): Difference between revisions
From SnesLab
(dp admodes) |
(→See Also: SMB) |
||
Line 75: | Line 75: | ||
* [[CLR1]] | * [[CLR1]] | ||
* [[TSET1]] | * [[TSET1]] | ||
* [[SMB]] | |||
=== External Links === | === External Links === |
Revision as of 04:00, 26 July 2023
Basic Info | |||||||
---|---|---|---|---|---|---|---|
Addressing Mode | Opcode | Length | Speed | ||||
Direct Page | 02 | 2 bytes | 4 cycles | ||||
Direct Page | 22 | 2 bytes | 4 cycles | ||||
Direct Page | 42 | 2 bytes | 4 cycles | ||||
Direct Page | 62 | 2 bytes | 4 cycles | ||||
Direct Page | 82 | 2 bytes | 4 cycles | ||||
Direct Page | A2 | 2 bytes | 4 cycles | ||||
Direct Page | C2 | 2 bytes | 4 cycles | ||||
Direct Page | E2 | 2 bytes | 4 cycles |
Flags Affected | |||||||
---|---|---|---|---|---|---|---|
N | V | P | B | H | I | Z | C |
. | . | . | . | . | . | . | . |
SET1 is an SPC700 command that sets a bit in a direct page byte. The byte following the opcode determines which byte. The high nibble of the opcode determines which bit within that byte.
See Also
External Links
- Official Nintendo documentation on SET1: Appendix C-9 of Book I
- http://www.ffviman.fr/switch-snes/sf-sound.html