We've just updated MediaWiki and its underlying software. If anything doesn't look or work quite right, please mention it to us. --RanAS
SET1 (SPC700): Difference between revisions
From SnesLab
(added syntax) |
(no flags affected) |
||
| Line 71: | Line 71: | ||
'''SET1''' is an [[SPC700]] command that sets a bit in a [[direct page]] byte. The byte following the opcode determines which byte. The most significant 3 bits of the opcode determines which bit within that byte. | '''SET1''' is an [[SPC700]] command that sets a bit in a [[direct page]] byte. The byte following the opcode determines which byte. The most significant 3 bits of the opcode determines which bit within that byte. | ||
No flags are affected. | |||
==== Syntax ==== | ==== Syntax ==== | ||
Revision as of 20:37, 6 July 2024
| Basic Info | |||||||
|---|---|---|---|---|---|---|---|
| Addressing Mode | Opcode | Length | Speed | ||||
| Direct Page Bit | 02 | 2 bytes | 4 cycles | ||||
| Direct Page Bit | 22 | 2 bytes | 4 cycles | ||||
| Direct Page Bit | 42 | 2 bytes | 4 cycles | ||||
| Direct Page Bit | 62 | 2 bytes | 4 cycles | ||||
| Direct Page Bit | 82 | 2 bytes | 4 cycles | ||||
| Direct Page Bit | A2 | 2 bytes | 4 cycles | ||||
| Direct Page Bit | C2 | 2 bytes | 4 cycles | ||||
| Direct Page Bit | E2 | 2 bytes | 4 cycles | ||||
| Flags Affected | |||||||
|---|---|---|---|---|---|---|---|
| N | V | P | B | H | I | Z | C |
| . | . | . | . | . | . | . | . |
SET1 is an SPC700 command that sets a bit in a direct page byte. The byte following the opcode determines which byte. The most significant 3 bits of the opcode determines which bit within that byte.
No flags are affected.
Syntax
SET1 dip. bit
See Also
External Links
- Official Nintendo documentation on SET1: Table C-18 in Appendix C-9 of Book I
- subparagraph 8.2.3.1 of page 3-8-8, lbid.
- http://www.ffviman.fr/switch-snes/sf-sound.html