Memory/Accumulator Select

The Memory/Accumulator Select (M) flag is bit 5 of the 65c816's processor status register. It indicates whether the accumulator is 8 or 16 bits wide:

• When clear, the accumulator is 16 bits wide. It can only be clear in native mode.
• When set, the accumulator is 8 bits wide, but the high byte (B) is still retained. This is the case after reset because the processor is in emulation mode.

It can be affected by:

• REP (might clear it)
• SEP (might set it)
• PLP
• RTI

It affects the behavior of (possibly incomplete list):

• LDA
• STA
• STZ
• ADC
• SBC
• CMP
• PHA
• PLA
• LSR
• ASL
• ROR
• ROL
• ORA
• AND
• EOR
• INC
• DEC
• TSB
• TRB

But it does not affect XBA, TDC, TCD, or TCS.

There are no BMS or BMC instructions that examine this flag.

See Also

• Index Register Select

Reference

• Eyes & Lichty, page 422, Table 18.2. 65x Flags.